Top Band

Enfield/Snider Barrel Band Retaining Pins

#600839
Manufacturer part number: IMACC
$14.95

Original set of barrel band retaining pins for the Enfield and Snider rifles.

BannerProductPage

Out of stock

OVERVIEW

This is an original set of barrel band retaining pins for the Enfield and Snider rifles.

REVIEWS

Write a Review
Write a Review
These band retaining springs were covered in what appeared to be rust when I received them--however, it was not rust at all but some kind of smelly yak butter (?) preservative that cleaned right off with a pre-soak in Kroil and a little bit of delicate work with steel wool. The finish underneath was free of pitting and the parts looked new, unused, and in the white once this was completed.
A real bargain, in my opinion!
- David, October 11, 2015 | Verified Purchase
Was this review helpful? Yes No (0/0)
All usable some rust but will clean up just fine
- Richard, August 02, 2015 | Verified Purchase
Was this review helpful? Yes No (0/0)
Rusty and never used. They will fit nicely after cleaning.
- Ronald, March 13, 2015 | Verified Purchase
Was this review helpful? Yes No (0/0)
Just as described , the band springs are NOS. They were never installed on a rifle. You can tell because the pin end is still long for custom fitting. They did have surface rust which cleaned up with a wire brush and left the perfect aged grey metal patina. Very pleased.
Gerry in New Bedford, MA.
- Gerald, September 26, 2010 | Verified Purchase
Was this review helpful? Yes No (0/0)

Share your thoughts with other customers